Skilled Trades, Manufacturing and Labor Jobs!

Please list the 4 digit number and job title when applying! Also visit our website for more information on duties/qualifications for EACH job!
Good luck in your job search. Visit www.career-options.com for all job postings and apply today!2733Mini Excavator Operator—Kaukauna
This Kaukauna company is seeking a qualified person to operate construction equipment; mini excavator, skid steers forklifts. This company provide services in the Residential commercial and industrial areas, sawing of basement doorway, Egress windows, Excavating, Concrete removal and Replacement, curb cutting, and core drilling. This company rarely lays off during the winter! (You may also be working inside the shop during the winter or bad weather.)
Qualifications- This job requires experience operating a mini excavator or skid steer, Concrete finishing experience. CDL and good driving record also required. Some lifting required in this position.
Hours: Start time is approx. 6 or 7am (although it can occasionally be earlier depending on the job.) This position required overtime. 10-12 hours per day.
Pay: 12.50-15.00/hour#2556WELDERS & FABRICATORS
** PROMOTION - EMPLOYEE WILL BE ELIGIBLE FOR A $250.00 BONUS AFTER 30 DAYS OF EMPLOYMENT ON THIS POSITION. GOOD ATTENDANCE AND WORK ETHIC ARE REQUIRED! **
6 temp to hire welders /fabricators are needed for this Neenah union shop. After 90 days, employees must join the union. These positions are available immediately! **SEE WWW.CAREER-OPTIONS.COM FOR ALL DUTIES!**
JOB QUALIFICATIONS
A.Education:High school degree and possibly related college courses.
B. They prefer a candidate that has on the job experience with welding (6 months experience in the past 2-3 years) - short arc (hard wire) and flex core, read blue prints, and are not afraid of heights. Also, must have good oral communication skills. Person will be getting dirty, welding, grinding, and cutting.
Pay:$12/hour (will go up to $15 if person has BOTH welding and fabrication experience ) - - After 90 days they become employees of the company and must agree to join the union and pay union dues. They will be part of the Fabricator's Union. This company offers health, dental, life, STD, and 401K to all of the fabricator/welder employees.
Hours: 6-: 2:30pm26031 CNC MACHINISTS-LATHE OPERATOR-APPLETON
**Drug Test req. before first day of work. ****Must wear safety shoes.**
** PROMOTION - EMPLOYEE WILL BE ELIGIBLE FOR A $250.00 BONUS AFTER 30 DAYS OF EMPLOYMENT ON THIS POSITION. GOOD ATTENDANCE AND WORK ETHIC ARE REQUIRED!**
These are temp to hire positions on second shift. **SEE WWW.CAREER-OPTIONS.COM FOR ALL DUTIES!**
QUALIFICATIONS REQUIRED
This position requires machine tool technology, or equivalent experience or training, and three years of machine shop experience. Requires ability to read blueprints and set-up sheets. Requires knowledge of all machine codes and their proper functions, to include canned cycles and related codes, "G”. Position requires organized individual who pays strict attention to detail and is quality conscious. Ability to work with little or no supervision. Safety glasses and shoes required as well as a drug test before the first day.
PAY: $16.50-19.75
SECOND SHIFT: 2:25PM-10: 55PM, M-F (but you will train on first shift for a few weeks.)
The position pays $16.50-19.75
Second shift: 2:25PM-10:55AM, M-F (but you will train on first shift for a few weeks.)263512 BACK UP LINE OPERATORS
** PROMOTION - EMPLOYEE WILL BE ELIGIBLE FOR A $250.00 BONUS IF HE/SHE GETS HIRED ON AFTER 320 HOURS OR ABOUT 2 MONTHS. GOOD ATTENDANCE AND WORK ETHIC ARE REQUIRED!**
*Drug Test and Physical Required before first day of work!*
Duties: We have 12 temp to hire Back Up Line Operator positions open for a company in Appleton.6 openings on 2nd shift- 2pm-10pm, M-F6 openings on 3rd shift -10pm-6am-M-F
**SEE WWW.CAREER-OPTIONS.COM FOR ALL DUTIES!**
(Great news.... you could get hired on after 2 months or 320 hours!)
Experience: 1 year of a manufacturing experience (machine operation in a food manufacturing setting is preferred but not required)Qualifications: Must be able to comprehend and communicate in basic English. Candidate must show longevity at previous jobs, good attendance, and be dependable. Needs to be able to lift 50-100 pounds. Forklift exp. is required. Steel toe shoes required. *Drug Test and Physical Required before first day of work!*
Pay: Second shift is 10.25 and third shift is 10.50
After being hired on, the position moves to $11.55/hour + .25 differential (2nd shift) or .50 (third shift.) Benefits include 401K, medical/dental insurance, short and long term disability benefits.
Hours:
2nd shift- 2pm-10pm.3rd shift - 10-6am.26682-MIG WELDERS—APPLETON $13-$14
This company is seeking 2 temp to hire welders. It is a temp to hire position, however, the company may consider buying out the contract after 45 days. The company is seeking a person to fabricate/weld/install hydraulic truck mounted equipment. (This company does mostly custom welding, rather than production line welding.) This is an excellent company and atmosphere! Many Career Options employees have been hired on at this company and they enjoy working at this company a lot!
Qualifications: Mechanical skills and blueprint reading skills are greatly desired.Must have a minimum of 2-3 years of "MIG welding (custom welding needed rather than production line welding)
Drug test required before first day!
Hours: YOU can choose: 7:00am to 3:30pm M-F, or 6:00am to 2:30pm M-Fpm, or 6:00am to 4:30pm M-TH. However, after being hired on, your schedule will be set at 6am-3: 30 or 4:30pm. Some overtime required.
Pay: 13.00-14.00 + possible raise when hired! Benefits: health, dental, life, and 401K - Most benefits start 30 days after being hired on. EXCEPT 401K, that starts after 1 year.2698BACK UP QC TECHNICIAN—APPLETON
This is a temp to hire position for a busy Appleton company!
The Back Up Quality Control Technician works in food assembly/production a great deal of the time but then also fills is as QC Technician. The candidate will train in QC for first few weeks and then do a combination of QC and assembly duties. There is a possibility of this eventually becoming a full time QC position in future or other advancement opportunities.
Responsibilities for QC are:
**SEE WWW.CAREER-OPTIONS.COM FOR ALL DUTIES!**
Qualifications: Must be able to work in environment with mechanical parts, food fumes, airborne particles, extreme cold, extreme heat, and loud noise levels.High school diploma or equivalent. Associate Degree in a science or management discipline preferred but not required.Ability to comprehend and communicate in basic English
Ability to calculate figures and amounts such as percentages, proportions, areas and volumes.Strong ability to maintain confidentiality and work with team.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.Must obtain a score of 80% or higher on the Basic Entry Math Test.
Manufacturing or QC experience required. (Food industry experience helpful, but not required.)
Proficient word processing and spreadsheet skills such as MS Word, Excel. (Access, and AS400 also helpful but not required)
Fax and copier.
Must be able to lift up to 75 lbs.Must be able to pass drug test and physical before first day!
3rd shift(10pm to 6 am, M-F)
Pay: $11.95 is the assembly rate
When performing QC Tech pay increases to $13.95
Upon hire, the rate will still be $11.95, but employee will receive .50 shift premium for third shift when doing assembly.
Benefits includes 401K, medical/dental insurance, short and long term disability benefits.2716MACHINIST APPRENTICE—HORTONVILLE
This small company in Hortonville is offering a great opportunity to someone who wants to learn to be a machinist or wants more experience. They will train a motivated candidate with a great work ethic to be a machinist. Candidate will learn to operate CNC Turning Centers, CNC Vertical Machining Center, Manual Lathes and Bridgeport style Mills. They have 13 employees who are cross trained in several areas, so candidate must be willing to assist in a variety of duties. This is a temp to hire. (Tools are provided)
Qualifications: Strong attention to detail, strong mechanical skills, and manufacturing experience is needed for this opportunity. Candidate MUST have Machine Shop experience and have a general knowledge of CNC machines, lathes, and mills. Candidate must have exp. with calipers, micrometers, etc. Some lifting required and excellent work ethic is needed.Pay: 12-13.00/hour. Once hired, they have an excellent health care package, 401k, holidays, etc.Hours: You can pick! 6am-2pm, 7-3pm, or 8-4pm.
2720CONCRETE FINISHER
This is a temp to hire position for a concrete finisher in the Kaukauna area. Candidate will be pouring sidewalks and driveways and well as helping with replacement and tear out of concrete. Candidate will be doing residential and commercial projects in the surrounding areas.Qualifications: Must have 2-3 years of finishing concrete experience. Valid driver's license and good driving record. Must be able to do physical work that includes lifting. Preference to those who have excavating (tearing out of concrete) and skidsteer / mini excavator equipment experience. Those with good work references and strong work ethic should apply.
Hours: Start time is approx. 6 or 7am (although it can occasionally be earlier depending on the job.)
Pay: 12.50/hour2730
MACHINE PAINTER—APPLETON
This is a long term temporary position for second shift in Appleton for a machine painter. This will last until the end of 2006, perhaps into 2007.
**SEE WWW.CAREER-OPTIONS.COM FOR ALL DUTIES!**
QUALIFICATIONS: Completion of a Vocational Diploma in auto body training, equivalent training, and/or two years experience in painting. Knowledge of coating systems, equipment and materials is needed. Must be able to read blue prints, work independently, and be willing to work flexible hours to meet production/shipping plans. MUST HAVE own tools such as spray gun, etc. and wear steel toes. (This co. will not choose to interview if you don't have your own tools) *Drug test required!*
**Must wear safety shoes.**
Hours: Second shift, 2:25pm-10:55pm M-F
Pay is $14.00 to $17.00 per hour
REQUIREMENTS
See above for qualifications